100 W Generator Power Unit
100 W Generator Power Unit is designed to provide onboard dual voltage regulated power supply for the unmanned aircraft vehicles.
Despite small size, power unit offers outstanding efficiency as well as unique features such as the ability to monitor load, battery current, engine rpm, generator and battery voltage through TTL serial communication. All power distribution parameters can be transmitted to the ground station and monitored during the flight.
Generator power unit can be used with brushless or brushed generators that have a voltage output within 10-35 Volts and 13-50 Volts respectively. Integrated Lithium Polymer charger is used for the backup battery, which is switched on during the pre-flight checks, power peaks, or in the event of the engine failure.
Power unit is packed in a sealed aluminum enclosure and fitted with the high-end industrial push-pull connectors.
Please contact for customized solutions.
|Brushed generator voltage range||13 – 50 V|
|Brushless generator line voltage range||10 – 35 V|
|External power supply voltage range||13 – 50 V|
|Battery Type||3 cells Li-Polymer|
|Battery Voltage||12.6 V|
|Maximum battery charging current||2 A|
|Maximum continuous generator input current||8 A|
|Maximum continuous battery input current||8 A|
|Maximum continuous external power current||8 A|
|Output voltage||6 V and 12 V|
|Maximum output voltage ripple||200 mV@6V 400mV@12V|
|Continuous load current, 6 Volt output 1,2||5 A|
|Continuous load current, 12 Volt output 1,2||5 A|
|Maximum peak load current||10 A for 10 seconds|
|Efficiency of 6 Volt output||85% typical|
|Efficiency of 12 Volt output||90% typical|
|No load GPU current||110 mA|
|Tachometer range||1000-90000 rpm|
|Tachometer accuracy||200 rpm|
|Current sensor range||0 to 10 A|
|Current sensor accuracy||0.2 A|
|Voltage sensor accuracy||0.1 V|
|Serial Communication||5V TTL|
|Dimensions||59.4 x 115.8 x 32.4 mm|
|Weight ( with conductive enclosure)||190 grams|
|Cooling method||Conductive or fan-assisted|
|Maximum enclosure temperature||70°C|
|Environmental protection||IP 64 standard, IP 68 on request|
|Operating temperature||- 40°C to +50°C 1|
|Electrical connectors||Fischer 104 Series push-pull connector|
1 Enclosure temperature must not exceed 70°C, additional cooling may be required.
You will require Adobe Reader version 9.0 or higher to view this document.